Close

You’re shopping from: United States of America

Best sellers

SESTO SENSO 2 robotic...
  • -€25.08
In Stock
SESTO SENSO

SESTO SENSO 2 robotic focusing motor

PrimaLuceLab
SESTOSENSOII
€195.41 €220.49
8 Reviews
SESTO SENSO 2 - The highly accurate, advanced, vibration free, robotic focusing motor for your telescope! Connect it to the USB port of your EAGLE or Windows® computer to electronically control focus while still allowing you to manually move your focuser by hand if needed. If you don’t want to focus using a computer, you can connect wirelessly from any...
Eagle-compatible power...
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 8A port

PrimaLuceLab
PL1000043
€31.97
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like QHYCCD, ATIK, ZWO, QSI cooled cameras,...
Dovetail Clamp...
In Stock
Dovetail clamps

Dovetail Clamp Vixen+Losmandy PLUS

PLLMORVLP
€55.74
4 Reviews
The dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance). Our dovetail clamps, unlike the common ones, offer...
Temperature sensor for...
In Stock
ECCO

Temperature sensor for ECCO, SESTO SENSO and ESATTO

PrimaLuceLab
SESTOSENSO-TEMP
€20.49
Be the first to review this product
This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...
Eagle-compatible power...
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 3A port

PrimaLuceLab
PL1000042
€31.97
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like SkyWatcher EQ6, HEQ5 and EQ5,...
Vixen style dovetail plate...
In Stock
Dovetail bars

Vixen style dovetail plate 240mm PLUS

PLLVIX240P
€48.36
Be the first to review this product
The Vixen style dovetail plate 240mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 240mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components such as support...
Losmandy style dovetail...
In Stock
Dovetail bars

Losmandy style dovetail plate 240mm PLUS

PLLLOS240P
€60.66
Be the first to review this product
The Losmandy style dovetail plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 240mm long and is useful for installing medium dimensions telescopes (such as refractors up to 130mm and reflectors up to 200mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all...
12,8V AC adapter for EAGLE...
In Stock

12,8V AC adapter for EAGLE - 14A

PrimaLuceLab
PL1000057
€159.84
Be the first to review this product
If you want to power EAGLE (that can power all other connected devices) and use it from a fixed station such as an observatory, you can connect it to an AC adapter power supply. This 12,8V 14A power supply (compatible with 100 to 240V) comes a 2,5 meters extension cable and EU (Schuko), UK and USA plugs. When used with the included extension, the power...
Eagle-compatible power...
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 3A port

PrimaLuceLab
PL1000044
€31.97
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like the ESATTO focusers and the SESTO...
ECCO2, environmental...
In Stock
ECCO

ECCO2, environmental computerized controller for EAGLE

PrimaLuceLab
ECCO2
€159.84
Be the first to review this product
ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point...
Losmandy style dovetail...
In Stock
Dovetail bars

Losmandy style dovetail plate 350mm PLUS

PLLLOS350P
€72.95
Be the first to review this product
The Losmandy style dovetail plate 350mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 350mm long and is useful for installing medium dimensions telescopes (such as refractors up to 120mm and Newton up to 250mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all the...
EAGLE type connector for 3A...
In Stock
EAGLE-type power cables

EAGLE type connector for 3A power OUT ports

PrimaLuceLab
PL1000036
€12.30
Be the first to review this product
EAGLE type connector for 3A power OUT ports allow you to it allows you to create your own cables to 12V power, through EAGLE, various instruments such as mounts, CCD cameras and other astro photography accessories. Included in the package you find instructions to proper cable heading.
PLUS 30mm spacers
In Stock
Spacers and curved blocks

PLUS 30mm spacers

PrimaLuceLab
PLLSPES30
€38.52
Be the first to review this product
When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 30mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the...
EAGLE type connector for...
In Stock
EAGLE-type power cables

EAGLE type connector for power IN and 5A or 8A power OUT ports

PrimaLuceLab
PL1000035
€12.30
Be the first to review this product
EAGLE type connector for power IN and 5A or 8A power OUT ports allow you to it allows you to create your own cables to 12V power, through EAGLE, various instruments such as mounts, CCD cameras and other astro photography accessories. Included in the package you find instructions to proper cable heading.
ESATTO 2" robotic focuser
  • Pack
In Stock
ESATTO 2"

ESATTO 2" robotic focuser

PrimaLuceLab
PLLEST2-B
€553.28
2 Reviews
ESATTO is the new generation robotic focuser that includes motor and advanced electronics and you control with EAGLE or any Windows computer by connecting it to a USB port, or via WiFi by using the Virtual HandPad on your smartphone or tablet! The 2” version of the ESATTO 2" has 50.9mm free aperture, 15mm of draw tube travel, 5kg load capacity and...
Big Dovetail Clamp...
In Stock
Dovetail clamps

Big Dovetail Clamp Vixen+Losmandy PLUS

PrimaLuceLab
PLLMORVLPB
€118.85
1 Reviews
The big dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or give the possibility to assemble the Losmandy...
Eagle-compatible power...
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 8A port

PrimaLuceLab
PL1000045
€31.97
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like Moravian cooled cameras.
PLUS 20mm spacers
In Stock
Spacers and curved blocks

PLUS 20mm spacers

PrimaLuceLab
PLLSPES20
€34.43
Be the first to review this product
When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 20mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the...
SESTO SENSO 2 33mm adapter
In Stock
SESTO SENSO

SESTO SENSO 2 33mm adapter

SESTOSENSO-AD33II
€62.30
Be the first to review this product
This 33mm adapter allows you to install SESTO SENSO 2 on focusers that come with a 33mm diameter shaft, like 2,5" and 3" FeatherTouch focusers (or other focusers with a 33mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it to focusers...
Losmandy style dovetail...
In Stock
Dovetail bars

Losmandy style dovetail plate 495mm PLUS

PLLLOS495P
€89.34
1 Reviews
The Losmandy style dovetail plate 495mm PLUS is designed to let you install your telescopes on mounts with this connection. This dovetail plate is 495mm long and is useful for installing large dimensions telescopes (such as Newton up to 300mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all the elements of the PLUS...
DX finder base
In Stock
Optical finders

DX finder base

PLLBACEDX
€23.77
Be the first to review this product
DX finder base can be installed on many telescopes to let you install finder supports from many brands. The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.
Vixen style dovetail plate...
In Stock
Dovetail bars

Vixen style dovetail plate 140mm PLUS

PLLVIX140P
€31.97
Be the first to review this product
The Vixen style dovetail plate 140mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 140mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components such as support...
Adapter from M56 to M48...
In Stock
ESATTO 2"

Adapter from M56 to M48 with stop ring for ESATTO 2" and ARCO 2"

PL3600216
€77.87
Be the first to review this product
M48x0.75 adapter for ESATTO 2" allows you to connect any camera or accessory with M48x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M48 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
PLUS 10mm spacers
In Stock
Spacers and curved blocks

PLUS 10mm spacers

PrimaLuceLab
PLLSPES10
€23.77
2 Reviews
When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the...
2" visual back for ESATTO...
In Stock
ESATTO 2"

2" visual back for ESATTO 2" and ARCO 2"

PL8410001
€69.67
Be the first to review this product
If you want to use your telescope visually with ESATTO 2" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 2" to M56 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect...
Vixen style dovetail plate...
In Stock
Dovetail bars

Vixen style dovetail plate 350mm PLUS

PLLVIX350P
€64.75
Be the first to review this product
The Vixen style dovetail plate 350mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen style dovetail plate is 350mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components...
60mm CompactGuide scope...
In Stock
Guiding systems

60mm CompactGuide scope with PLUS 80mm guide rings

PLLCG60
€151.64
1 Reviews
60mm CompactGuide scope with PLUS rings is, at a really affordable price, a perfect guide scope with 60mm diameter and 240mm focal length (f/4) achromatic lens, non rotative 31,8mm helical focuser and 80mm PLUS guide rings (each with 3 screws with nylon tip) for an easy and rigid connection. Thanks to the included extension, it can also be used as a...
M81 25mm extension tube for...
In Stock
ESATTO 3”

M81 25mm extension tube for ESATTO 3" and ARCO 3"

PrimaLuceLab
PL3600285
€48.36
Be the first to review this product
The M81 25mm extension tube can be directly threaded to the ESATTO 3" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M81 extension tube has 25mm thickness, it's made up of aluminum, black anodized and it has a M81 female on the camera side this way you can connect all the ESATTO 3" camera adapters.
ESATTO 3" robotic focuser
  • Pack
In Stock
ESATTO 3”

ESATTO 3" robotic focuser

PrimaLuceLab
PLLEST3-B
€774.59
Be the first to review this product
ESATTO robotic focuser is also available in 3" version with 76.3mm free aperture, 25mm of draw tube travel, 8kg of payload capacity and an incredible resolution of 0,04 micron per step! The perfect solution for apochromatic refractors and Ritchey-Chretien or Cassegrain telescopes, and heavy imaging trains with large cameras and accessories like off axis...
Dew heater for 60mm...
In Stock
Dew heaters

Dew heater for 60mm diameter telescopes

PrimaLuceLab
PLLFAS60
€45.08
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 60mm diameter telescopes can be easily...
ARCO 2" camera rotator and...
In Stock
ARCO 2"

ARCO 2" camera rotator and field de-rotator

PrimaLuceLab
PLLARCO2
€569.67
Be the first to review this product
ARCO 2" is the new low profile ARC second resolution rOtator that, thanks to its incredible resolution of 1 arc second per step, is the most precise camera rotator and field de-rotator! The 2” version of ARCO has a thickness of only 20mm and a free aperture of 50.9mm. When used together with an equatorially mounted telescope, ARCO allows you to rotate the...
Counterweight PLUS 1Kg
In Stock
Other accessories for mounts

Counterweight PLUS 1Kg

PLL-CONTRPLUS
€36.89
Be the first to review this product
This 1 Kg counterweight allow easier balance of the optical tubes . It can be installed both side, on the front or rear optics of any instrument. ​Dimensions: 65x60mm, 35mm thickness.
Adapter ESATTO 2" for...
In Stock
ESATTO 2"

Adapter ESATTO 2" for telescopes with large 3.3" SC thread

PL3600212
€53.28
Be the first to review this product
SC 3.3” adapter for ESATTO 2" allows you to connect the ESATTO 2" to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 67mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 77mm of backfocus for your camera and accessories, also when used together with the Celestron EdgeHD .7x focal...
Vixen style dovetail plate...
In Stock
Dovetail bars

Vixen style dovetail plate 90mm PLUS

PLLVIX90P
€27.87
Be the first to review this product
The Vixen style dovetail plate 90mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen style dovetail plate is 90mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components...
Losmandy style PLUS...
  • Pack
In Stock
Dovetail bars

Losmandy style PLUS dovetail plate with curved blocks for C9.25, C11, EdgeHD 9.25 e 11...

PrimaLuceLab
PLLLOS495SAG925_
€145.90
Be the first to review this product
This kit, composed of plate 495mm Losmandy style PLUS dovetail plate and PLUS curved blocks, can be installed either below (for connecting a Losmandy type dovetail bar under the telescope) and above (for supporting a parallel telescope) to the C9.25 or C11 Schmidt-Cassegrain or EdgeHD 925 and 1100 aplanatic Schmidt-Cassegrain telescopes by Celestron.
Dew heater for 80mm...
In Stock
Dew heaters

Dew heater for 80mm diameter telescopes

PrimaLuceLab
PLLFAS80
€48.36
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 80mm diameter telescopes can be easily...