Close

You’re shopping from: United States of America

ECCO-NTC adapter for Dew Heater Rings

FAST SHIPPING with express courier

ECCO-NTC adapter for Dew Heater Rings

PL1000061

ECCO-NTC is the adapter that allows you to use a Celestron Dew Heater Ring with the ECCO2 environmental computerized controller. Dew Heater Rings differ from standard dew heater straps, as they utilize an NTC thermistor to measure temperature of SC or aplanatic SC telescopes corrector plate without the need for an external temperature probe.

ECCO-NTC is small and lightweight, allowing you to connect it to any standard Vixen-style finder shoe and it comes with 2 grub screws to attach the main body of ECCO2. ECCO-NTC does not require external power since it’s powered directly by ECCO2.

This adapter is specifically designed to work with ECCO2 and it’s not compatible with the previous/first generation ECCO controller.

Pay in a single solution or over 3 installments of €31,42*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.
Availability: In Stock


€94.26
VAT excluded

If you pay by bank transfer 91,43 €

Pay in a single solution or over 3 installments of €31,42*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.

 

ECCO-NTC adapter for Dew Heater Rings - main features:

  • It allows you to use Celestron Dew Heater Ring with ECCO2 environmental computerized controller
  • Designed to be connected to a standard Vixen-style finder shoe
  • Compact and lightweight, just 40gr (1.4oz)
  • No need for external power
  • It includes cables to connect to ECCO2 and to Dew Heater Ring.

 

 

 ECCO-NTC adapter for Dew Heater Rings

 

 

ECCO-NTC: Plug&Play with ECCO2 and Dew Heater Rings

ECCO-NTC doesn’t require special software and it doesn’t require external power: just connect ECCO2 and attach the cables (see diagram) in order to let you use Dew Heater Ring with your ECCO2 and EAGLE:

  • Insert ECCO2 body into ECCO-NTC and lock it with the 2 grub screws
  • Connect the "12VDC 5.5/2.1 mm to RCA power cable" (that is included with the Dew Heater Ring) to one of the EAGLE's dew heater ports.
  • Connect "3.5mm to 3.5mm power jack cable" to ECCO's port number corresponding to the EAGLE's dew heater port you connected the "12VDC 5.5/2.1 mm to RCA power cable". For example: if you connect dew ring power cable to EAGLE's port number 6, you have to connect this "3.5mm to 3.5mm power jack cable" to port 6 of the ECCO2.
  • Connect the other side of this "3.5mm to 3.5mm power jack cable" to 3.5mm port on one side of the ECCO-NTC.
  • Connect the "2.5mm to 2.5mm cable" to port 2.5mm port on one side of the ECCO-NTC and to the thermistor jack of dew ring.
  • Connect the "USB-C port to USB-A port cable" (that is included with ECCO2) to ECCO2 and to EAGLE (compatible with EAGLE models with dew heater ports).

 

 

 ECCO-NTC adapter for Dew Heater Rings

 

 

ECCO-NTC adapter for Dew Heater Rings - scope of delivery:

- ECCO-NTC

- 3.5mm to 3.5mm power jack cable (length 14cm - 5.5in)

- 2.5mm to 2.5mm cable (length 120cm - 47.2in)

- Quick guide

 

 

 ECCO-NTC adapter for Dew Heater Rings

New product

Reviews

No reviews

More about this product:

You might also like

DX finder base
In Stock
Optical finders

DX finder base

PLLBACEDX
€23.77

If you pay by bank transfer 91,43 €

Be the first to review this product
DX finder base can be installed on many telescopes to let you install finder supports from many brands. The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.
Guide scope support for ECCO
In Stock
ECCO

Guide scope support for ECCO

ECCOSUP
€64.75

If you pay by bank transfer 91,43 €

Be the first to review this product
ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).
ECCO2, environmental...
In Stock
ECCO

ECCO2, environmental computerized controller for EAGLE

PrimaLuceLab
ECCO2
€159.84

If you pay by bank transfer 91,43 €

Be the first to review this product
ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point...
PLAY - Prima Luce...
Software

PLAY - Prima Luce AstrophotographY software

PLAY
Be the first to review this product
PLAY is the astrophotography software that allows you to record beautiful pictures of the night sky in the simplest way, with the telescope, mount and camera you prefer! Connect all your telescope devices to PLAY and start your exploration of the Universe: check the Planetarium sky chart to find astrophotography targets, visualise your field of view, and...
View
EAGLE5 S computer for...
  • -€139.34
In Stock
EAGLE

EAGLE5 S computer for telescopes and astrophotography

EAGLE5S
€1,250.00 €1,389.34

If you pay by bank transfer 91,43 €

Be the first to review this product
EAGLE5 is the most advanced all-in-one computer for telescopes and astrophotography, that simplifies remote control and power of telescopes and that allows you to control the devices you want with the Windows software you prefer. Inside the unique PLUS aluminum housing designed to be easily installed on your telescope and simplify cable management, the...