The adapter ESATTO 3,5” LP for OfficinaStellare Veloce RH200 allows you to install ESATTO 3,5" LP focuser to Veloce RH200 telescopes by Officina Stellare. Optical thickness of this adapter is 9mm.
Officina Stellare Veloce RH300 athermal astrograph offers an incredible f3 focal ratio together with large 300mm diameter generating not only incredibly deep astroimages but also rich in details. Its design allows a corrected field all over the large 60 mm diameter so it's perfect also for the largest camera sensors, like 36x36 mm. Thanks to the ESATTO...
Adapter ESATTO 4" for Takahashi FSQ-106EDX 3 and 4 allows you to install ESATTO 4" instead of the original Takahashi focuser. This adapter has 35mm optical thickness and it is designed to have, when used together with ESATTO 4", the same thickness of the original focuser (100.5mm) in order to allow you to reach focus with the telescope. Not compatible...
Celestron C11-XLT with dovetail Losmandy type is a 280mm f/10 Schmidt-Cassegrain telescope and, thanks to the ESATTO 2" robotic microfocuser, there is no more image shift and you can focus the telescope with extreme precision, even remotely.
SkyWatcher Newton QUATTRO 200/800 f4 with SESTO SENSO is 200mm f/4 telescope perfect for astrophotography, thanks also to advanced features of SESTO SENSO 2 motor. Low weight and dimensions make it perfect to use also with not too large mounts.
SkyWatcher EVOSTAR 100 ED with SESTO SENSO and PLUS rings is the 100mm f/9 apochromatic refractor that offers high performance especially for visual use or imaging at high magnifications. Thanks to the most advanced focusing motor and PLUS rings, you can get the most from your telescope.
Adapter from M81 to T2 with stop ring for ESATTO 3" allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the T2 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
SC 3.3” adapter for ESATTO 2" allows you to connect the ESATTO 2" to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 67mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 77mm of backfocus for your camera and accessories, also when used together with the Celestron EdgeHD .7x focal...
The 140mm PLUS support rings are designed telescopes with tube approximately 140mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics.
This dew heater for 300mm diameter telescopes can be easily...