Close

You’re shopping from: United States of America

Home

3% more discount if you pay with bank transfer - insert product in cart to get discount

Computer
Computer
Featured
Featured
Rotators
Rotators
Complete telescopes
Complete telescopes
Optical tubes
Optical tubes
Mounts
Mounts
Focusers
Focusers
Dovetail bars and rings
Dovetail bars and rings
Various accessories
Various accessories
Gift card
Gift card
Calibration
Calibration
Observatory Stations
Observatory Stations
Radio astronomy
Radio astronomy
Photo accessories
Photo accessories
Eagle power cable with... Eagle power cable with... 2
In Stock

Eagle power cable with Anderson connector with 16A fuse- 250cm

PL10000AND
€48.36
Be the first to review this product
In order to power the Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has an Anderson connector with 16A fuse to...
Dew heater for 280mm...
In Stock
Dew heaters

Dew heater for 280mm diameter telescopes

PLLFAS280
€81.15
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 280mm diameter telescopes can be easily...
AZ-EQ5 PLUS adapter plate
In Stock
Dovetail clamps

AZ-EQ5 PLUS adapter plate

PLLFLAZEQ5
€33.61
Be the first to review this product
AZ-EQ5 PLUS adapter plate
Eagle-compatible power...
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 3A...

PL1000017
€40.16
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity, and it offers a locking screw. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. In order to check compatibility with the device you...
Adapter ESATTO 3,5” LP for...
In Stock
ESATTO 3,5" LP

Adapter ESATTO 3,5” LP for OfficinaStellare Veloce RH300

PL3600361
€241.80
Be the first to review this product
The adapter ESATTO 3,5” LP for OfficinaStellare Veloce RH300 allows you to install ESATTO 3,5" LP focuser to Veloce RH300 telescopes by Officina Stellare. Optical thickness 9mm.
Officina Stellare Veloce...
  • Pack
Not available
Astrographs

Officina Stellare Veloce RH300 f3 athermal with ESATTO 3,5" LP

VELRH300AT-B
€20,836.07
Be the first to review this product
Officina Stellare Veloce RH300 athermal astrograph offers an incredible f3 focal ratio together with large 300mm diameter generating not only incredibly deep astroimages but also rich in details. Its design allows a corrected field all over the large 60 mm diameter so it's perfect also for the largest camera sensors, like 36x36 mm. Thanks to the ESATTO...
View
Adapter ESATTO 4" for...
In Stock
ESATTO 4”

Adapter ESATTO 4" for Takahashi FSQ-106EDX 3 and 4

PL3600324
€135.25
Be the first to review this product
Adapter ESATTO 4" for Takahashi FSQ-106EDX 3 and 4 allows you to install ESATTO 4" instead of the original Takahashi focuser. This adapter has 35mm optical thickness and it is designed to have, when used together with ESATTO 4", the same thickness of the original focuser (100.5mm) in order to allow you to reach focus with the telescope. Not compatible...
GM3000 adapter for C120 pier
In Stock
Tripods and piers

GM3000 adapter for C120 pier

C120-GM3000
€299.18
Be the first to review this product
This adapter allows you to install the GM3000 mount on the C120 pier.
T2 spacer 0,5mm
In Stock
Photographic adapters

T2 spacer 0,5mm

PL3304200
€9.84
Be the first to review this product
T2 spacers are available with 0,5mm or 1mm thickness and are used together with T2 extensions in order to fine set extension total thickness.
Celestron C11-XLT with...
  • Pack
Schmidt-Cassegrain

Celestron C11-XLT with dovetail Losmandy type and ESATTO 2"

CE91036-XLTEST2
Be the first to review this product
Celestron C11-XLT with dovetail Losmandy type is a 280mm f/10 Schmidt-Cassegrain telescope and, thanks to the ESATTO 2" robotic microfocuser, there is no more image shift and you can focus the telescope with extreme precision, even remotely.
View
SkyWatcher Newton QUATTRO...
  • Pack
Newton reflectors

SkyWatcher Newton QUATTRO 200/800 f4 with SESTO SENSO

SKP2008IWP-FSS_
Be the first to review this product
SkyWatcher Newton QUATTRO 200/800 f4 with SESTO SENSO is 200mm f/4 telescope perfect for astrophotography, thanks also to advanced features of SESTO SENSO 2 motor. Low weight and dimensions make it perfect to use also with not too large mounts.
View
SkyWatcher EVOSTAR 100 ED...
  • Pack
APO refractors

SkyWatcher EVOSTAR 100 ED apochromatic refractor with SESTO SENSO

SKBKED100SS_
Be the first to review this product
SkyWatcher EVOSTAR 100 ED with SESTO SENSO and PLUS rings is the 100mm f/9 apochromatic refractor that offers high performance especially for visual use or imaging at high magnifications. Thanks to the most advanced focusing motor and PLUS rings, you can get the most from your telescope.
View
Adapter from M81 to T2 with...
In Stock
ESATTO 3”

Adapter from M81 to T2 with stop ring for ESATTO 3" and ARCO 3"

PL3600282
€90.16
Be the first to review this product
Adapter from M81 to T2 with stop ring for ESATTO 3" allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the T2 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Adapter ESATTO 2" for...
In Stock
ESATTO 2"

Adapter ESATTO 2" for telescopes with large 3.3" SC thread

PL3600212
€53.28
Be the first to review this product
SC 3.3” adapter for ESATTO 2" allows you to connect the ESATTO 2" to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 67mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 77mm of backfocus for your camera and accessories, also when used together with the Celestron EdgeHD .7x focal...
140mm PLUS support rings
In Stock
Support rings

140mm PLUS support rings

PLLANSU140P
€274.59
Be the first to review this product
The 140mm PLUS support rings are designed telescopes with tube approximately 140mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...
Dew heater for 300mm...
In Stock
Dew heaters

Dew heater for 300mm diameter telescopes

PLLFAS300
€89.34
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 300mm diameter telescopes can be easily...
12V power cable with banana...
In Stock

12V power cable with banana plugs for Eagle - 250cm

PL1000028
€36.89
Be the first to review this product
In order to power the Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has banana connector.
Adapter ESATTO 3,5” LP for...
  • New
Not available
ESATTO 3,5" LP

Adapter ESATTO 3,5” LP for PlaneWave DeltaRho 350

PL3600386
€241.80
Be the first to review this product
The adapter ESATTO 3,5” LP for PlaneWave DeltaRho 350 allows you to install ESATTO 3,5" LP focuser to DeltaRho 350 telescopes by PlaneWave. Optical thickness 23.36mm.
View
Adapter ESATTO 4" for...
In Stock
ESATTO 4”

Adapter ESATTO 4" for Takahashi TOA130

PL3600380
€159.84
Be the first to review this product
Adapter ESATTO 4" for Takahashi TOA130 allows you to install ESATTO 4" instead of the original Takahashi focuser.
Eagle-compatible power...
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 8A...

PL1000037
€40.16
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity, and it offers a locking screw. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. In order to check compatibility with the device you...
SkyWatcher Newton QUATTRO...
  • Pack
Newton reflectors

SkyWatcher Newton QUATTRO 150/600 f4 with SESTO SENSO

SKP1506-IWP-FSS_
Be the first to review this product
SkyWatcher Newton QUATTRO 150/600 f4 with SESTO SENSO is the smallest version of QUATTRO reflectors and it's perfect for astrophotography, thanks also to coma corrector included in the price and to advanced features of SESTO SENSO 2 focusing motor. Low weight and reduced dimensions make it perfect to use also with compact mounts.
View
T2 spacer 1mm
In Stock
Photographic adapters

T2 spacer 1mm

PL3304201
€9.84
Be the first to review this product
T2 spacers are available with 0,5mm or 1mm thickness and are used together with T2 extensions in order to fine set extension total thickness.
GSO Ritchey-Chretien 304mm...
  • Pack
Ritchey-Chretien

GSO Ritchey-Chretien 304mm f/8 with metal tube and ESATTO 3"

GSRC12MEST3
Be the first to review this product
GSO 304mm f/8 Ritchey-Chretien with metal tube and ESATTO 3" robotic microfocuser is the perfect telescope for long exposure astrophotography also with heavy cameras and accessories. Thanks to the optional corrector it offers a large corrected field.
View
SkyWatcher EVOSTAR 100 ED...
  • Pack
APO refractors

SkyWatcher EVOSTAR 100 ED apochromatic refractor with ESATTO 2"

SKBKED100EST2_
Be the first to review this product
SkyWatcher EVOSTAR 100 ED is a great 100mm f/9 apochromatic refractor that, thanks to the ESATTO 2" microfocuser and PLUS rings, is perfect also for the most demanding astrophotography with heavy cameras and accessories.
View
Adapter from M81 to M48...
In Stock
ESATTO 3”

Adapter from M81 to M48 with stop ring for ESATTO 3" and ARCO 3"

PL3600277
€90.16
Be the first to review this product
Adapter from M81 to M48 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M48 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M48 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Adapter ESATTO 2" for...
In Stock
ESATTO 2"

Adapter ESATTO 2" for telescopes with SC thread

PL3600209
€28.69
Be the first to review this product
Thanks to its low profile, the ESATTO 2" is the perfect motorized focuser for Schmidt-Cassegrain telescopes like the 8” and 9.25” Celestron SCT and EdgeHD 800 models. By adding the SC adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus, avoiding focus shift and mirror...
Dew heater for 350mm...
In Stock
Dew heaters

Dew heater for 350mm diameter telescopes

PLLFAS350
€89.34
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 180mm diameter telescopes can be easily...
Losmandy style PLUS...
  • Pack
In Stock
Dovetail bars

Losmandy style PLUS dovetail plate with curved blocks for C9.25, C11, EdgeHD 9.25 e 11...

PLLLOS495SAG925_
€145.90
Be the first to review this product
This kit, composed of plate 495mm Losmandy style PLUS dovetail plate and PLUS curved blocks, can be installed either below (for connecting a Losmandy type dovetail bar under the telescope) and above (for supporting a parallel telescope) to the C9.25 or C11 Schmidt-Cassegrain or EdgeHD 925 and 1100 aplanatic Schmidt-Cassegrain telescopes by Celestron.
145mm PLUS support rings
In Stock
Support rings

145mm PLUS support rings

PLLANSU145P
€282.79
Be the first to review this product
The 145mm PLUS support rings are designed telescopes with tube approximately 145mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...
Losmandy style dovetail...
  • New
In Stock
Dovetail bars

Losmandy style dovetail plate 915mm PLUS

PLLLOS915P
€200.82
Be the first to review this product
The Losmandy style dovetail plate 915mm PLUS is designed to let you install your telescopes on mounts with Losmandy style dovetail clamp. Since this dovetail plate is 915mm long and thickness is 13mm like all our Losmandy style dovetail plates, we suggest to use it with optical tubes up to 30kg in weight. This 915mm PLUS Losmandy style dovetail plate can...
Adapter ESATTO 4" for...
In Stock
ESATTO 4”

Adapter ESATTO 4" for Officina Stellare ProRC, RiDK, RiFAst

PL3600326
€192.62
Be the first to review this product
The adapter ESATTO 4" for Officina Stellare ProRC, RiDK, RiFAst allows you to install ESATTO 4" focuser to ProRC, RiDK, RiFAst telescopes by Officina Stellare that come with M120x1.5 female thread in the rear plate.
M48 spacer 0,5mm
In Stock
Photographic adapters

M48 spacer 0,5mm

PL3304800
€9.84
Be the first to review this product
M48 spacers are available with 0,5mm or 1mm thickness and are used together with M48 extensions in order to fine set extension total thickness.
150mm PLUS support rings
In Stock
Support rings

150mm PLUS support rings

PLLANSU150P
€290.98
Be the first to review this product
150mm PLUS support rings can be used with all telescopes with 150mm diameter tube to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC...
Adapter from M81 to M54...
In Stock
ESATTO 3”

Adapter from M81 to M54 with stop ring for ESATTO 3" and ARCO 3"

PL3600275
€90.16
Be the first to review this product
Adapter from M81 to M54 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M54 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Adapter from M56 to M57...
In Stock
ESATTO 2"

Adapter from M56 to M57 with stop ring for ESATTO 2" and ARCO 2"

PL3600227
€77.87
Be the first to review this product
Adapter from M56 to M57 with stop ring for ESATTO 2" allows you to connect any camera or accessory with M57x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" focuser draw tube. Thanks to the M57 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...