The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics.
This dew heater for 450mm diameter telescopes can be easily...
The Eagle control unit can directly power supply SBIG STL and STXL camera. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...
GSO 254mm f/8 Ritchey-Chretien with truss carbon fiber tube and ESATTO 3" robotic microfocuser is the perfect telescope for long exposure astrophotography also with heavy cameras and accessories. Thanks to the optional corrector it offers a large corrected field.
SkyWatcher EVOSTAR 120 ED apochromatic refractor with SESTO SENSO and PLUS rings is the kit created by PrimaLuceLab at a special price! Get the best performance from the SkyWatcher EVOSTAR 120 ED thanks to the most advanced focusing motor and the PLUS rings.
Adapter from M81 to M57 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M57 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M57 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Adapter from M56 to M54 with stop ring for ESATTO 2" allows you to connect any camera or accessory with M54x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M54 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
155mm PLUS support rings can be used with all telescopes with 155mm diameter tube like Takahashi FS-152 and TOA-130 telescopes (or other telescopes brands with tube approximately 155mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like...
Veloce RH350 f/2.8 is the largest Veloce in the Family. An incredible ultra fast, ultra wide and super sharp ultimate-astrograph. With it's fast f/2.8 focal ratio and the corrected wide field of 60mm, fully without vignetting, this telescope is your ultimate choice in terms of superior astrographs. You will never find an other telescope with a diameter of...
The dovetail clamp combined with the counterweight PLUS 1 kg , provides an excellent way to offset the unbalanced optical frames. It can be installed in front or rear to the optics on the support bar Vixen or Losmandy type. You can also install more weights to each other simply by screwing them to each other through the screws supplied as standard.
SkyWatcher EVOSTAR 120 ED is a great 120mm f/7.5 apochromatic refractor that, thanks to the ESATTO 2" microfocuser and PLUS rings, is perfect also for the most demanding long exposure astrophotography with heavy cameras and accessories.
Adapter from M81 to M68 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M68 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
The SC thread adapter for ESATTO 2" allows you to connect any accessory with SC female thread, like the SC focal reducers to ESATTO. Just thread this adapter to the M56 thread in the ESATTO 2" focuser draw tube. Thanks to the SC stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the...
The 168mm PLUS support rings are designed for telescopes with tube approximately 168mm in diameter, to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision...
GSO 304mm f/8 Ritchey-Chretien with truss carbon fiber tube and ESATTO 3" robotic microfocuser is the perfect telescope for long exposure astrophotography also with heavy cameras and accessories. Thanks to the optional corrector it offers a large corrected field.
Adapter from M81 to M72 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M72 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M72 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
M48x0.75 adapter for ESATTO 2" allows you to connect any camera or accessory with M48x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M48 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
The 180mm PLUS support rings can be used with telescopes that have 180mm diameter tube like Takahashi TOA150 to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...
Adapter from M81 to M65 with stop ring for ESATTO 3" and ARCO 3" allows you to connect any camera or accessory with M65 female thread. Just thread this adapter to the M81 thread of ESATTO 3" or ARCO 3". Thanks to the M65 stop ring you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object. Optical...
Officina Stellare RiFast 400 f3.8, with the tree-lens field flattener and two aspherical elements, is the real masterpiece of this telescope. Diffraction-limited over a wide and flat field, the RiFast design will push any camera to its limits... and will do it FAST! The extraordinary f3.8 ratio allows a higher productivity per night, a significant factor...
Adapter from M56 to T2 with stop ring for ESATTO 2" allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the T2 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
SkyWatcher EVOSTAR 150 ED apochromatic refractor with SESTO SENSO and PLUS rings is the kit created by PrimaLuceLab at a special price! Get the best performance from the SkyWatcher EVOSTAR 150 ED thanks to the most advanced focusing motor and the PLUS rings.
GSO Ritchey-Chretien 355mm f/8 with truss carbon fiber tube is perfect for astrophotography is perfect for those looking for a quality telescope for deep-sky astrophotography at an incredible price. Thanks to the carbon tube, the GSO RC 355mm f/8 not only is more stable and lighter but also it has higher thermal stability, so it keeps the focus point more...
DSLR camera use lithium batteries that, during long exposure astrophotography, can run out of charge and thus avoid you imaging the night sky. That's why we created these cables with voltage regulator and false battery that allow you to power your camera directly from the Eagle (also Eagle Core) in place of the battery.
235mm PLUS support rings can be used with any brands telescopes (for example Newton 200mm in diameter) with tube approximately 235mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision...
244mm PLUS support rings can be used with any brands telescopes (for example Takahashi Mewlon 210mm) with tube 244mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC...
If you are searching for the most precise motorized focuser for Takahashi FSQ85, this adapter allows you to connect ESATTO 3" to this telescope. By adding the M81 to M72 adapter with stop ring you can also connect your Takahashi accessories. Based on the camera and accessories train you want to connect, you may need extenders to reach the focus with your...
GSO Ritchey-Chretien 406mm f/8 with truss carbon fiber tube is perfect for astrophotography is perfect for those looking for a quality telescope for deep-sky astrophotography at an incredible price. Thanks to the carbon tube, the GSO RC 406mm f/8 not only is more stable and lighter but also it has higher thermal stability, so it keeps the focus point more...
DSLR camera use lithium batteries that, during long exposure astrophotography, can run out of charge and thus avoid you imaging the night sky. That's why we created these cables with voltage regulator and false battery that allow you to power your camera directly from the Eagle (also Eagle Core) in place of the battery.
Officina Stellare RiFast 400 f3.8, with the tree-lens field flattener and two aspherical elements, is the real masterpiece of this telescope. Diffraction-limited over a wide and flat field, the RiFast design will push any camera to its limits... and will do it FAST! The extraordinary f3.8 ratio allows a higher productivity per night, a significant factor...
SkyWatcher ESPRIT 80 ED is a compact and lightweight apochromatic refractor, ED triplet 80mm f/5, that thanks to SESTO SENSO 2, PLUS rings and field flattener, is perfect for wide field astrophotography of deep-sky object!
Thanks to its low profile, the ESATTO 3" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 3" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus.
Officina Stellare ProRC 400 f8 Ritchey-Chrétien telescope is a 400mm f/8 professional telescope, completely free from chromatic aberration, and the performance is the same at any wavelength. ProRC 400 f8 offers 60mm fully corrected and illuminated field and ESATTO 4" robotic microfocuser: thanks to the high back focus extraction, backfocus is 125mm...
If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and cabron tubes) for astrophotography, this adapter allows you to connect ESATTO 3" to the M117 thread of these telescope. Optical thickness of the "PL3600236" adapter is 43mm so, when you add the ESATTO 3"...
The EAGLE control unit can directly power supply FLI camera. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally from the EAGLE.
SkyWatcher ESPRIT 100 ED with ESATTO 3" is a great 100mm f/5.5 apochromatic refractor that, thanks to ESATTO 3" microfocuser and PLUS rings, is perfect for astrophotography also with heavy cameras and accessories.