Close

You’re shopping from: United States of America

Best sellers

Adapter ESATTO 3" for ARCO 3"
In Stock
ARCO 3"

Adapter ESATTO 3" for ARCO 3"

PL3600458
€77.87
Be the first to review this product
Adapter ESATTO 3" for ARCO 3" allows you to connect the rotator to ESATTO 3" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 3", thickness of rotator is 24.5mm.
M48 spacer 0,5mm
In Stock
Photographic adapters

M48 spacer 0,5mm

PrimaLuceLab
PL3304800
€9.84
Be the first to review this product
M48 spacers are available with 0,5mm or 1mm thickness and are used together with M48 extensions in order to fine set extension total thickness.
65mm extension tube for...
In Stock
ESATTO 3”

65mm extension tube for ESATTO 3"

PL3600284
€113.11
Be the first to review this product
When installing ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a micrometric focuser. For this reason we have designed this 65mm extension that can be installed between ESATTO 3" and the telescope tube. A precise dovetail...
Big dovetail clamp...
  • Pack
In Stock
Dovetail clamps

Big dovetail clamp Vixen+Losmandy PLUS for HEQ5

PLLMORVLPB-HEQ5_
€147.54
Be the first to review this product
The big dovetail clamp Vixen+Losmandy PLUS for HEQ5 allows you to install, on the Skywatcher HEQ5 mount, telescopes with Vixen and Losmandy dovetail bars. The HEQ5 mount can connect only Vixen type dovetail plates: with our big dovetail clamp Vixen+Losmandy PLUS for HEQ5 you can also connect the Losmandy type dovetail plates!
Guide rings PLUS 115mm
In Stock
Guiding systems

Guide rings PLUS 115mm

PLLANGU115P
€86.07
Be the first to review this product
If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 115mm offer a high build quality and all the features useful for this application, allowing you to install guide telescopes such as 80mm diameter refractors. Like all the other elements of the PLUS...
ECCO-NTC adapter for Dew...
In Stock
ECCO

ECCO-NTC adapter for Dew Heater Rings

PL1000061
€94.26
Be the first to review this product
ECCO-NTC is the adapter that allows you to use a Celestron Dew Heater Ring with the ECCO2 environmental computerized controller. Dew Heater Rings differ from standard dew heater straps, as they utilize an NTC thermistor to measure temperature of SC or aplanatic SC telescopes corrector plate without the need for an external temperature probe. ECCO-NTC is...
Adapter ESATTO 2" LP for...
In Stock
ESATTO 2" LP

Adapter ESATTO 2" LP for telescopes with SC thread

PL3600542
€77.87
Be the first to review this product
By adding this adapter, you can connect the ESATTO 2" LP low profile robotic focuser directly onto the back of SC telescopes. This adapter threads directly to the back SC thread of EdgeHD 8" and C8 telescopes. Optical thickness is 2.5mm.
ESATTO 3,5" LP low profile...
  • Pack
In Stock
ESATTO 3,5" LP

ESATTO 3,5" LP low profile robotic focuser

PLLEST35LP-B
€979.51
Be the first to review this product
ESATTO 3,5” LP is the most advanced yet affordable low profile robotic focuser specially designed for the most demanding astrophotography! At just 32mm of thickness, ESATTO 3,5” LP provides a large 90mm free aperture with 10mm of travel, impressive 10 kg of payload capacity and an astounding resolution of 0.01 microns per step! ESATTO 3,5” LP has been...
Losmandy style dovetail...
In Stock
Dovetail bars

Losmandy style dovetail plate 645mm PLUS

PLLLOS645P
€130.33
Be the first to review this product
The Losmandy style dovetail plate 645mm PLUS is designed to let you install your telescopes on mounts with Losmandy style dovetail clamp. Since this dovetail plate is 645mm long and thickness is 13mm like all our Losmandy style dovetail plates, we suggest to use it with optical tubes up to 30kg in weight. This 645mm PLUS Losmandy style dovetail plate can...
GIOTTO 150 Smart Flat Field...
Not available
GIOTTO flat field generators

GIOTTO 150 Smart Flat Field Generator

PLLGIOTTO150
€258.20
Be the first to review this product
GIOTTO 150 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 150mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...
View
ESATTO 4" robotic focuser
In Stock
ESATTO 4”

ESATTO 4" robotic focuser

PrimaLuceLab
PLLEST4
€1,143.44
Be the first to review this product
ESATTO 4" is the large dimensions robotic focuser that we designed for observatory class telescopes or for astrographs that need for large free aperture, like the Takahashi FSQ-106. Compared to the smaller models, ESATTO 4" offers a larger free aperture of 102.2mm, a longer draw tube travel of 35mm and a higher payload capacity of 10 kg, always with the...
100mm PLUS support rings
In Stock
Support rings

100mm PLUS support rings

PLLANSU100P
€200.82
Be the first to review this product
The 100mm PLUS support rings are designed to be used with Ø100mm tube refractor telescope (or other telescopes brands with tube approximately 100mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS...